Company » News » 549

Newsroom

Teledyne DALSA launches its X-Ray Image Reconstruction Technology for extra oral imaging at IDS 2017

Posted 3/14/2017

EINDHOVEN, The Netherlands – March 14, 2017 – Teledyne DALSA, a Teledyne Technologies company and global leader in digital X-Ray image sensing technology, will introduce advanced scanning reconstruction software for  its Xineos family of CMOS dynamic flat X-Ray detectors at the International Dental Show (IDS)taking place March 21 to 25 at the Kölnmesse, Köln, Germany in Hall 11.2, Stand N060.

Teledyne DALSA is expanding its role as the innovation leader in 2D and 3D extra-oral dental imaging with the introduction of a software library designed to provide dentists and OEMs with improved images and better input for diagnosis and treatment. With Xineos X-Ray Image reconstruction technology for scanning applications, users can expect an increase in depth of field across the full dental arch, overall image sharpness, lowered dose and increased patient comfort as well as improved workflow efficiencies. The technology is based on the reconstruction of a volume of tomographic planes through the patient anatomy, and the synthesis of a single 2D panoramic or cephalometric image delivering an ultra-sharp representation of all relevant clinical features.

Xineos CMOS flat X-Ray detectors offer significant advantages over traditional film or existing digital sensors. By delivering superior clinical performance in real time, Xineos CMOS flat detectors live at the heart of today’s highly innovative interventional X-Ray imaging systems. Switchable saturation dose, high dynamic range, calibration stability and unsurpassed low dose signal-to-noise performance makes them the preferred image sensing solution for a wide range of applications.

The following are featured in the Teledyne DALSA booth:

  • Xineos-2222HS and Xineos-3030HS – 9”and 12” equivalent detectors with 152 µm pixel size designed for real time surgical and cardio vascular procedures. The industry’s only flat detectors to surpass the low dose clinical imaging performance of image intensifiers.
  • Xineos-2022HR and Xineos-3030HR – 9” and 12” high resolution detectors with 99 µm pixel pitch for advanced extra oral dental, clinical and scientific applications.   
  • Xineos-1515 –High resolution detector with 99 µm pixel pitch, featuring a spacious square field of view. Embedded real-time image processing and seamless switchable saturation dose modes for combining high dynamic range and superior low dose detectability in a single detector for panoramic or 3D-dental and extremities imaging applications.
  • Xineos-1511 – new medium size detector featuring 99 µm pixel size, offering excellent low dose diagnostic image quality, switchable saturation dose modes and embedded real-time image processing in a compact footprint. Designed specifically for use in cost-effective 2-in-1 dental imaging systems, it is ideally suited to allow 3D and full 15 cm tall panoramic scans using a single detector.
  • Xineos-1501 and Xineos-2301 – new ultrafast scanning detectors with 99 µm pixel pitch, offering switchable saturation dose modes and image readout in excess of 300 fps at the native pixel resolution. Supporting both advanced frame based reconstruction on the host, as well as an on‑board Digital TDI mode to retrofit to existing panoramic and cephalometric scanning imaging systems.
  • Xineos-1313EO – designed for Medium Field of View (MFOV) Cone Beam CT applications.

Visit Teledyne DALSA at IDS, Hall 11.2, Stand N060.

Where:                 IDS 2017
                             Hall 11.2, Stand N060
                             Kölnmesse, Messeplatz 1 Köln, Germany

When:                  March 21 – 25, 2017
 
For additional information, contact sales.sensors@teledynedalsa.com.

Media Note: For additional information, watch our X-Ray Imaging video. Images and additional information can be found in our media kithttp://teledynedalsa.com/corp/news/media-kit/

About Teledyne DALSA’s Life Sciences Products and Services
Teledyne DALSA provides state-of-the-art image sensing, capture and processing solutions to medical, dental and scientific equipment manufacturers. Building on more than 30 years of proven capability and innovation, our team of imaging specialists delivers leading-edge product design. Our manufacturing processes are tailored to comply with the stringent quality, reliability and traceability requirements of the medical and scientific X-Ray community. For more information, visit http://teledynedalsa.com/imaging/markets/dental/

About Teledyne DALSA
Teledyne DALSA is an international technology leader in sensing, imaging, and specialized semiconductor fabrication. Our image sensing solutions span the spectrum from infrared through visible to X-Ray; our MEMS foundry has earned a world-leading reputation. In addition, through our subsidiaries Teledyne Optech and Teledyne Caris, we deliver advanced 3D survey and geospatial information systems. Teledyne DALSA employs approximately 1400 employees worldwide and is headquartered in Waterloo, Canada. For more information, visit www.teledynedalsa.com.

###
All trademarks are registered by their respective companies.
Teledyne DALSA reserves the right to make changes at any time without notice.

Media Contact:
Geralyn Miller
Manager, Media Relations & Content Development
Teledyne DALSA
Tel: +1-519-886-6001 ext. 2187
Email: geralyn.miller@teledyne.com

Sales Contact:
sales.sensors@teledynedalsa.com

 

The dental community’s largest supplier of CMOS flat X-Ray detectors introduces revolutionary 2D reconstruction software to complement its portfolio of high resolution and low noise digital detectors.

Bookmark and Share

Latest Blog Posts

Log in to your Teledyne DALSA account:

Forgot your password? Reset it here. Don't have an account? Register for one.