Company » News » 569

Newsroom

Our Imaging Counterpart, Teledyne e2v, Equips One of The World’s Most Powerful Survey Telescopes

Posted 10/11/2017

Waterloo, ON  October 11, 2017 - Teledyne DALSA's sister company, Teledyne e2v, has been awarded a multimillion dollar contract by SLAC National Accelerator Laboratory (SLAC) to supply customised Charge Coupled Device (CCD) image sensors for the Large Synoptic Survey Telescope (LSST). This 8.4 metre telescope is being constructed in Chile to carry out a ten year survey of the sky to address fundamental astronomy questions about dark matter, dark energy, near Earth asteroids, transient optical objects (such as supernovae), and the formation of our Milky Way galaxy.

Teledyne e2v has designed a high-performance customised sensor to achieve exceptional sensitivity and stable performance with an extremely flat focal surface which delivers 3,200 Megapixels of image data per exposure. The camera will incorp orate 189 large-area sensors which will be delivered to SLAC for construction into the cryogenically-cooled camera. Approximately one third of the science sensors have already been delivered in a previous contract phase. The contract award follows previous prototype and 'First Article' contracts and requires Teledyne e2v to deliver essential components for the LSST.

The LSST was identified as a US national scientific priority by the 2010 USA National Research Council decadal survey. It has the largest digital camera ever built for ground-based astronomy and will be one of the world’s most powerful astronomical survey telescopes when commissioned in 2021. The telescope has a novel three-mirror design to provide high efficiency and a wide field of view.

SLAC is building the immense camera which will record images that cover an area of 49 times that of a full moon. The powerful telescope will capture images of the entire sky every few nights in multiple colour bands. These will be used to construct a detailed catalogue of the sky, providing brightness, colour and time variability information at a greater depth than ever before.

“This telescope and camera will stimulate the astronomy world with a huge survey data set which will be followed by many astronomers worldwide and will set a new standard against which other instruments will be compared,” says Dr. Paul Jorden, Astronomy Product Specialist at Teledyne e2v. The sensors have very challenging design features and Teledyne e2v has demonstrated that they can be made in large quantities and delivered to a tight schedule.

Dr Giuseppe Borghi, VP Business Development says, "This is a key achievement for Teledyne, and for our Teledyne e2v UK team in particular. Our success is due to the extraordinary performance of the sensors and the great trust and collaboration that we have built with the LSST team. We are extremely proud to have supported this project for several years and have overcome a number of technical challenges by working closely with our customer. We look forward to seeing how this extremely innovative telescope will help develop our understanding of the Universe.” 

The sensors supplied by Teledyne e2v will be at the very heart of the LSST camera. They have been designed for very high sensitivity and optimised for enhanced red wavelength sensitivity. The large camera requires an extremely flat focal surface, and so the Teledyne e2v sensors are designed to achieve a surface flatness precision one-twentieth of the width of a human hair. The 189 sensors will be built in a custom package that enables all of them to be assembled into a closely-packed mosaic to form the three Gigapixel array with minimal lost area and a mere 0.25 mm gap between sensors across the 630 mm diameter focal plane. The sensors have 16 output channels that enable them to read the image in a few seconds and allow a high rate of image collection.

Notes to Editors:
Financial support for LSST comes from the National Science Foundation (NSF) through Cooperative Agreement No. 1258333, the Department of Energy (DOE) Office of Science under Contract No. DE-AC02-76SF00515, and private funding raised by the LSST Corporation. The NSF-funded LSST Project Office for construction was established as an operating center under management of the Association of Universities for Research in Astronomy (AURA). The DOE-funded effort to build the LSST camera is managed by the SLAC National Accelerator Laboratory (SLAC).

Teledyne e2v's unique approach involves listening to the market and application challenges of its customers and partnering with them to provide innovative standard, semi-custom or fully custom imaging solutions, bringing increased value to their systems. In combination with its sister companies, Teledyne DALSA and Teledyne Imaging Sensors, three imaging powerhouses together represent a new paradigm in the delivery of innovative imaging solutions built on unrivalled expertise and a deep technological heritage that includes capabilities across the spectrum, from infrared to x-ray imaging. For more information visit www.teledyne-e2v.com

###

For media enquiries, please contact: 

Geralyn Miller | geralyn.miller@teledyne.com

CCD250 Sensor

Bookmark and Share

Latest Blog Posts

Log in to your Teledyne DALSA account:

Forgot your password? Reset it here. Don't have an account? Register for one.