Teledyne DALSA Inc

Log in | Create profile | Language

Xcelera-CL PX4 Full

Camera Link

Advanced performance and flexibility

Building on the field proven technology and performance of Teledyne DALSA’s X64 frame grabbers the new Xcelera Series leverages the PCI Express (PCIe) platform to bring traditional image acquisition and processing technology to new levels of performance and flexibility. The PCIe host interface is a point to point host interface allowing simultaneous image acquisition and transfer without loading the system bus and involving little intervention from the host CPU. The X64 Xcelera-CL PX4 Full is a Camera Link frame grabber that is based on the PCI Express x4 interface. Compatible with a Base, Medium or Full Camera Link® camera, the X64 Xcelera-CL PX4 Full supports a wide variety of multi-tap area and line scan color and monochrome cameras. For greater versatility, the X64 Xcelera-CL PX4 Full board can interface with camera pixel depths and tap configurations not covered by the Camera Link standard. For example, the Xcelera-CL PX4 Full can support 10-taps or higher with 8-bits per tap.


Fully supported by Sapera™ vision SDK

When combined with a compatible Teledyne DALSA frame grabber, standard Sapera Processing run-time licenses are offered at no additional charge. Sapera Processing is at the heart of Sapera Vision Software, delivering a suite of image processing and analysis functions. These functions include over 400 image processing primitives, barcode tools, pattern matching tools (both area-based and edge-based), OCR, color and blob analysis, measurement, and calibration tools for perspective and lens correction. The standard tools run-time license includes access to image processing functions, area based (normalized correlation based) template matching tools, blob analysis, and lens correction tools.

Specifications

Part Number OR-X4C0-XPF00
Board Type PCIe
Host Bus PCIe Gen1 x4
Board Interface Camera Link
Connectors

Data: 2xMDR CameraLink

Controls:

  • 1x 40-pin shrouded header
  • 1x 4-pin connector for multi-board synchronization
Camera Format 1x CameraLink Base, Medium, Full or 80-bit(DECA) mode
Pixel Clock 20 to 85 MHz
Bits per Pixel 8, 10, 12, 14 and 16-bit/pixel
Number of Camera Taps

1, 2 and 3 Taps – 8/10/12/14/16-bit mono

3 Taps – 8/10/12-bit RGB

4 Taps – 8/10/12/14/16-bit mono

8 Taps – 8-bit mono

10 Taps – 8-bit mono

GPIO 4-opto in/4-opto out
Camera Control 2 x External Trigger input, Strobe out, Quadrature Encoder, Mulit-board Sync.
Frame Buffer 128 MB
Features PoCL ILUTs, Dead Pixel, Flat Field, Flat Line, Bayer
Software Sapera LT SDK, Sapera Vision Software
OS Support Windows 7 (32-bit), Windows 7 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 10 (32-bit), Windows 10 (64-bit), Linux (64-bit), WoW64

Downloads

Questions? Quotes? Contact sales.