AxCIS™ is a fully integrated line scan imaging module which combines sensors, lenses, and lights all-in-one. This Contact Image Sensor (CIS) is easy-to-use and offers a lower system cost for many demanding machine vision applications as well as superior signal-to-noise ratio and a Camera Link HS SFP+ fiberoptic interface. AxCIS can fit anywhere in your system, even with limited vertical clearance and it’s easy to install, with no complex alignment or calibration required and a single 24v power supply. Monochrome and color models are available now.
Maximizing flexibility for your every application, AxCIS offers selectable pixel size and resolution, letting you switch between 28/42/56/84 µm pixels for resolution from 300, 450, 600, all the way up to 900 DPI with the same unit.
AxCIS is based on Teledyne’s new quadlinear CMOS image sensors, which deliver up to 120 kHz line rates for mono, 60 kHz x 3 for color, and 900 dpi resolution, so that defects can be detected with precision at high speeds. The sensors are pre-calibrated to pixel size and available in color and monochrome.
The AxCIS™ family of high-speed and high-resolution fully integrated line scan imaging modules was recognized among the best by the 2024 VSD Innovators Awards. Votes placed by the engineering community recognized Teledyne DALSA as a Gold honoree in the visible cameras category.
Learn moreHDR imaging can be achieved using dual exposure mode. One row of the sensor array can have longer exposure for dark scenes and the other has short exposure for bright scenes. This enables better detectability for highly reflective materials with improved dynamic range.
AxCIS uses a unique staggered design that covers the whole field of view without missing pixels. Every pixel has native data of true mono or color images and automatic tap balancing provides a 100% seamless image without any interpolation. AxCIS is available in widths of 400mm, 800mm, plus any other widths in increments of 100mm, plus selectable pixel size to deliver resolution at 300, 450, 600 and 900 DPI.
With a Camera Link HS SFP+ fiberoptic interface, AxCIS delivers high resolution images over standard low-cost long cables lengths (up to 300m). Fiberoptic cables provide reliable data transmission which are immune to electromagnetic radiation in harsh industrial environments.
A single Teledyne Xtium2-CLHS FX8 frame grabber supports up to 4 x 400mm modules with up to 1.6 m field of view.
Battery Inspection
Print Inspection
Printed Circuit Board
Web Inspection
General Machine Vision
Camera Type | Line Scan |
Sensor Technology | CMOS |
Supported Interfaces | Camera Link HS |
Spectrum Capability | Visible (400-700 nm), Near Infrared (700-1000 nm) |
Features | T2IR |
Model | Resolution | Spectrum | Interface | Pixel Size | Max Line Rate |
---|---|---|---|---|---|
AxCIS Color 400 mm Part number: AX-FC-04B06T-00
|
14304 x 3 | Color | Camera Link HS, Fiber Optic | 28 µm | 150 kHz |
AxCIS Mono 400 mm Part number: AX-FM-04B12H-00
|
14304 x 2 | Mono | Camera Link HS, Fiber Optic | 28 µm | 120 kHz |
AxCIS Color 800 mm Part number: AX-FC-08B06T-00
|
28608 x 3 | Color | Camera Link HS, Fiber Optic | 28 µm | 180 kHz |
AxCIS Mono 800 mm Part number: AX-FM-08B12H-00
|
28608 x 2 | Mono | Camera Link HS, Fiber Optic | 28 µm | 120 kHz |
Document | Type |
---|---|
AxCIS Color Datasheet | |
AxCIS Mono Datasheet |
Document | Type |
---|---|
AxCIS Quick Start Guide | |
AxCIS User Manual |
Document | Type |
---|---|
AxCIS 400MM Declaration of Conformity | |
AxCIS 800MM Declaration of Conformity | |
AxCIS Material Composition Declaration |
Document | Type |
---|---|
AxCIS 400 Customer Drawing | |
AxCIS 400 USER 3D MODEL | STP |
AxCIS 400 USER 3D MODEL with LEDs | STP |
AxCIS 800 Customer Drawing | |
AxCIS 800 USER 3D MODEL | STP |
AxCIS 800 USER 3D MODEL with LEDs | STP |